Opens in a new tab

    Nickel Alloy Market Tests Floor as Indonesia Signals Tighter 2027 Quotas

    October 30, 2026

The nickel alloy market has spent the past week searching for direction, caught between a near-term supply overhang and a policy signal from Indonesia that could tighten the picture next year. Prices have been volatile, with sentiment swinging on headlines about potential production cuts before fading.

Nickel Alloy Market Tests Floor as Indonesia Signals Tighter 2027 Quotas
Image Source: 699pic.com

On October 23, LME three-month nickel fell 1.15 percent to $15,935 per ton, giving back part of the previous day’s gains . The retreat came as traders grew skeptical about whether proposed coordinated output cuts by Chinese producers in Indonesia would actually materialize. Reports had suggested producers were considering halving mixed hydroxide precipitate output and cutting nickel pig iron by 20 percent. But no final decision was reached, and the size and duration of any cuts remained unclear .

A trader in Singapore told me the market has become headline-driven in a way that feels exhausting. “One day it is cuts, the next day it is denial. Nobody wants to be the last one holding a long position when the story falls apart.”

The supply side remains the dominant bearish force. Indonesia’s Energy and Mineral Resources Ministry confirmed that the revised 2026 RKAB nickel ore quota has reached approximately 290 to 300 million wet metric tons, up from the initial allocation of 260 to 270 million tons at the start of the year . That increase has eased the raw material tightness that supported prices earlier in 2026. Indonesian ore prices have reflected the shift: 1.6 percent grade laterite CIF fell more than 25 percent from its yearly high, while 1.2 percent grade dropped over 30 percent .

But the longer-term signal from Jakarta is more nuanced. On October 29, ESDM Director General Tri Winarno said the 2027 quota would be lower than the revised 2026 level, and that the government is explicitly considering the global nickel surplus when setting production targets . LME and SHFE inventories combined show a surplus of roughly 750,000 tons of nickel metal. Tri said Indonesia needs to avoid adding to that overhang.

That is a meaningful shift in tone. Indonesia has spent years expanding downstream capacity with little regard for global balances. The suggestion that it may now calibrate quotas to market conditions is a signal that the policy framework is maturing. But the 2027 quota is still months away from being finalized, and the market is treating the announcement as a forward-looking anchor rather than an immediate supply change.

Demand tells a more fragmented story. In stainless steel, the largest consumer of nickel alloys, purchasing remains cautious. Chinese high-grade nickel pig iron prices were weak through October, and social inventories of 300-series stainless rose after the National Day holiday rather than drawing down . The battery sector is no better. Nickel sulfate prices followed refined nickel lower, precursor plants are running at around 60 percent capacity, and spot buying is thin .

High-end nickel-based alloys are the exception. Demand from aerospace, nuclear power, and LNG storage has held steady through the price decline. A survey of alloy producers in Jiangsu found that superalloy and corrosion-resistant alloy order books remain stable, with buyers in these sectors largely indifferent to the month-to-month moves in LME nickel . That divergence matters. The nickel alloy market is no longer one market. Commodity-grade material for stainless and batteries is oversupplied and price-sensitive. Specialty grades for aerospace and energy infrastructure are tight, qualification-heavy, and priced on a different logic entirely.

Aerospace demand is a structural support. Commercial aircraft backlogs exceed 14,000 units, translating to roughly 280,000 tons of nickel-based superalloy demand over the next decade . Engine architectures are running hotter, requiring single-crystal and directionally solidified alloys with tight chemistry windows. Those grades cannot be substituted with commodity nickel. For producers with the metallurgical expertise and qualification track record, the demand pull is durable regardless of what LME nickel does this quarter.

On the trade front, the European Commission’s objection to China’s MMG acquiring Anglo American’s Brazilian nickel business remains unresolved. MMG has reiterated its willingness to guarantee supply to European customers, but the case reflects a broader trend: nickel alloy supply chains are being redrawn along geopolitical lines, not just economic ones .

There is also a new partnership worth watching. Canada Nickel and Swiss Steel Group announced plans for a long-term supply arrangement on October 26. Under the framework, Swiss Steel would gain exclusive access to approximately one million metric tons of low-carbon billets and blooms annually from Canada Nickel’s planned Crawford project, beginning in 2030 . The material would be processed into specialty steels for industrial customers. It is a small step in the context of global supply, but it signals that Western manufacturers are building alternative feedstock chains for alloy production, separate from Indonesian and Chinese-dominated routes.

Looking at the current market structure, nickel alloy is caught between two forces pulling in opposite directions. Near-term, Indonesian ore is loose, LME inventories are high, and stainless and battery demand are soft. That combination caps upside. Longer-term, Indonesia is signaling tighter quotas for 2027, high-end alloy demand is structurally firm, and supply chains are fragmenting into regional blocs. For buyers, the current price weakness offers room to negotiate on commodity-grade material. But for specialty grades, lead times and qualification requirements matter more than spot price. The two sides of this market are unlikely to converge anytime soon.

Contact Us